Recommended applications
ECOSTICK® 1816B is ideal for:
- Leather to leather bonding
- Oily leather bonding
- Leather and synthetic leather
- Textiles and linings
- Cardboard and covers
- PVC, EVA, nylon, and prepared rubber
- Foams, moltoprene, and foam rubber
- Leather goods
- Footwear
- Saddlery and upholstery
Product benefits
- Water-based adhesive without solvents
- Low odor
- Excellent adhesion
- High flexibility after drying
- Does not stiffen leather
- Transparent drying
- Compatible with oily leather
- High final resistance
- Environmentally and user friendly
Technical characteristics
| Characteristic | Value |
|---|---|
| Base | Polyurethane water dispersion |
| Appearance | White / transparent after drying |
| Application | Spray gun, roller, brush |
| Open time at room temperature | Up to 20 min after drying |
| Heat reactivation | Up to 48 h |
| Reactivation temperature | 60 to 70°C |
| Final resistance | Approx. 4 days |
| Recommended temperature | > 16°C |
Application methods
Standard application
- Apply the adhesive on both surfaces.
- Allow to dry.
- Assemble within 20 minutes after drying.
- Press firmly.
Heat reactivation
If the open time is exceeded:
- heat the adhesive between 60°C and 70°C
- assemble
- press immediately
Single-side application
Possible for:
- leather + textile
- leather + foam
- leather + low-absorbent materials
In this case:
- apply generously on the leather or the least absorbent material
- assemble immediately
Usage recommendations
- Stir well before use
- Use on clean and dry surfaces
- Strong pressure considerably improves adhesion
- Maximum resistance is reached after several days of drying
Leather craftsmen particularly appreciate ECOSTICK® 1816B for its ease of use and the absence of aggressive solvents.
Storage conditions
- Store at room temperature
- Keep tightly closed
- Protect from frost
- Recommended temperature: above 16°C after opening
Safety
- Water-based product
- Free from aggressive VOC solvents
- Non-hazardous for users under normal conditions of use
Proper ventilation is recommended during spray application, along with appropriate protective equipment.
