PRICKING IRON (702 serie)
With more than 450 references, we are selling the widest range in the market. Right / left / round teeths are avalilable ranging from the very...
With more than 450 references, we are selling the widest range in the market. Right / left / round teeths are avalilable ranging from the very...
Re-print of a 1900 nomenclature, originally engraved by Acker's printing office in Paris. A real work of art made by hand, and reproduced here in...
This modeler takes the original forms of the tools of the malettier. Lightweight, ergonomic, durable, does not compromise and will accompany the...
A traditional saddler's hammer, offering high striking power and excellent maneuverability in hard-to-reach areas.Carbon steel head and body,...
Quenched steel, then thinned and cold-sharpened to maintain optimal mechanical properties. Hand-sharpened cutting edge in a very tapered...
SADDLER CURVED AWLForged on a spring steel base.Hand-polished to facilitate penetration into the thickest leathers.Square cross-section.N°00 -...
Leatherworker's trimming knife for thinning leather.High-strength Moabi handle with brass ferrule.Extremely hard, tempered carbon steel blade can...
Total length : 18 cm No 3 : cutting width 3 mmNo 4 : cutting width 4 mmNo 5 : cutting width 5 mmNo 6 : cutting width 6 mmNo 8 : cutting width 8...
Leatherworker's trimming knife for thinning leather.High-strength Bubinga handle with brass ferrule.Extremely hard, tempered carbon steel blade can...
To protect and organize your tools ; we have developed 3 new kits of pricking irons folded in a fine leather case :• N°01 : Kit A containing 3...
Beechwood edge creaser new model This wide formoir has been specially designed for optimum ergonomics. Made from PEFC beech wood, this 4-groove...
Edge creaser to mark parallele lines on leather borders. Adjustable from 0 to 9mm Length : 20cm Brass screw / Boxwood handle / Forged head
Wooden edge creaser This thin, easy-to-hold formoir is particularly suitable for small and medium-sized parts. Made from Pau Amarello, selected for...
Sharpening kit for 3.747 edge beveler * One steel rod D3.5mm * Two A6 (105x148) sheets of sand paper P500 water-resistant (fine grit, silicon...
Diamond shaped leather sewing awl Tempered steel.
Round awl Diameters : Models 4 & 5 cm THIN : D = 1,5 mm Models 4 & 5 cm : D = 2,0 mm Models 6 & 7 cm : D = 2,5 mm Models 8, 9 &...
Round awl Boxwood handle Diameters : Models 4 et 5 cm : D = 2,0 mm Models 6 et 7 cm : D = 2,5 mm Models 8, 9 et 10 cm : D = 3,0 mm Models 11, 12...
Round awl Boxwood handle Diameters : Models 4 et 5 cm : D = 2,0 mm Models 6 et 7 cm : D = 2,5 mm Models 8, 9 et 10 cm : D = 3,0 mm Models 11, 12...
Round awl Boxwood handle Diameters : Models 4 et 5 cm : D = 2,0 mm Models 6 et 7 cm : D = 2,5 mm Models 8, 9 et 10 cm : D = 3,0 mm Models 11, 12...
Distance between edges : N°4 : 11 mm N°5 : 13 mm N°6 : 15 mm N°7 : 17 mm N°8 : 19 mm N°9 : 21 mm N°10 : 23 mm N°11 : 26 mm N°12 : 28 mm N°13 :...
N°3 : 8mm N°4 : 11mm N°5 : 13mm N°6 : 15mm N°7 : 17mm N°8 : 19mm N°9 : 21mm N°10 : 23mm N°11 : 26mm N°12 : 28mm N°13 : 31mm N°14 : 33mm N°15 :...
N°3 : 7mm x 2mm N°4 : 9mm x 2.5mm N°5 : 11mm x 2.5mm N°6 : 13.5mm x 3mm N°7 : 16mm x 3mm N°8 : 18mm x 4mm N°9 : 21mm x 4mm N°10 :...
With this special tool, redesigned with our professionnal users, we are setting a new standard of quality on the market. Spring steel for maximum...
A generous handle for this tool. Mounted on bearings and riveted axle for increased durability. Available widths: 25mm // 40mm // 60mm
Hole punch tip 6.0mm for Revolving round punch 7734
ROUND AWL HANDLE SMALL MODEL - CHERRY WOOD Total length: 85/95/105 mm Wooden handle / brass ferrule The size of the handle depends on your...
ROUND AWL HANDLE HANDLE MODEL - CHERRY WOOD Total length: 85/95/105 mm Wooden handle / brass ferrule The size of the handle depends on your...
ROUND AWL HANDLE LARGE MODEL - CHERRY WOOD Total length: 85/95/105 mm Wooden handle / brass ferrule The size of the handle depends on your...
Round awl with handle N°0-95mmForged on a spring steel base.Hand-polished to facilitate penetration into the thickest leathers.Square...
Quenched steel, then thinned and cold-sharpened to maintain optimal mechanical properties. Hand-sharpened cutting edge in a very tapered...
Références 3.1011D : right hand, 150mm 3.1011G : left hand, 150mm 3.1012D : right hand, 170mm 3.1012G : left hand, 170mm
Dimensions : Diameter 3 + 6mm slot Diameter 4 + 7mm slot Diameter 5 + 8mm slot Diameter 6 + 9mm slot
Brass scabbard for knife "L'Indispensable" Unchanged for more than 100 years, this versatile tool will be your reference for clean and accurate...
Beginners tool made in metal sheets, this double axis revolver punch plier is delivering an outstanding power at the cutting point. It allows...
Belt loop clipper, made out of plain noble wood in our workshop, perfectly fitting on your sewing jaws. Curved jaws to perfectly hold your finest...
Belt loop clipper, made out of plain noble wood in our workshop, perfectly fitting on your sewing jaws. Curved jaws to perfectly hold your finest...
Beech wood PEFC handle. Brass ferule. High speed steel, heat treated in our forge workshop. Dimension 17cm. Opening of 1.0 or 1.5mm available.
Spare blade for knife "L'Indispensable" Manufactured in several sharpening shapes : Standard = double bevel Right or left = single bevel
Réglet métallique en acier inoxydable Largeur 25mm Graduation recto-verso en 1/2mm Longueurs disponibles : 20 / 30 / 50 / 100cm
N°1 : 1.5mm x 1mm *** will be back end of 2021 N°2 : 2mm x 1.5mm *** will be back end of 2021 N°3 : 2.5mm x 1,5mm *** will be back end of 2021 N°4...
Leatherworker's trimming knife for thinning leather.High-density wood handle with brass ferrule.Hardened high-speed steel blade, can be sharpened...
Total length : 25 cmVarnished wood handle, copper, forged steel Delivered with 4 wheels 7,8,10,12 (3.85mm / 3.38mm / 2.70mm / 2.25mm)Tool can be...
Handcrafted in France from glued laminated Meranti for excellent strength and dimensional stability. Total length: 130 cm Large working...
Stitching clam varnished wood 1050 x 72 mm Handcrafted in France from glued laminated Meranti for excellent strength and dimensional stability....
included: Diameter of Punch pincers : 2mm / 2.5mm / 3mm / 3.5mm / 4mm / 5mm
Trimming knife for smoothing cut edges.Adjustable movable blade to compensate for wear as you sharpen.Boxwood handle / Brass ferrule / High-speed...
Weight: 470 g Length: 29 cm Round head diameter: 30 mmSquare head width: 30 mmForged steel, varnished handle
Edge creaser to mark all sketched on leather (preparation for sewing of cuttting). Ergonomic bent head to facilitate constant pressure. Losangique...
Adjustable side leadTotal length : 25 cmVarnished wood handle, copper, forged steel Delivered with 4 wheels 7,8,10,12 (3.85mm / 3.38mm / 2.70mm /...
Total length : 25 cm Varnished wood handle, copper, forged steel Mounted with one wheel no7 : 3.85mm between teeth Don't forget to order other...
Tensionning pliers with dual axes for a better clamping force control, preventing leather or fabrics slippering. Light and ergonomic, this pair of...
Blade and handle for 10cm and 15cm mechanical knives.This knife is handmade in our workshop out of high quality steel, quenched to deliver you a...
This superb traditionnal leather cutting tool will soon become the 'must have' of your tool set.It will allow you to precisely cut leather stripes...
This superb traditionnal leather cutting tool will soon become the 'must have' of your tool set.It will allow you to precisely cut leather stripes...
Weight: 880 g Length: 34 cm Striking diameter: 45 mm Head length: 115 mmVarnished wooden handle / plastic tips
Untwister swivel wooden body Traditional swivel with 2 rotating ends. 4mm hardened steel wire / Beech body Length : 125mm
Weight: 250 g Length: 18 cm Width: 30 mm Stainless steel / rubber handle
Coachbuilder's pin wooden handle classical size
Brass scabbard for knife "L'Indispensable" Unchanged for more than 100 years, this versatile tool will be your reference for clean and accurate...
SHARPENING RIFLE 20 CM WOOD HANDLE Total length: 31.5 cm Rifle length: 20 cm Wooden handle Brand: Au Nain
Total length : 18 cm No 0 : cutting width 0.4mmNo 1 : cutting width 0.6mmNo 2 : cutting width 0.8mmNo 3 : cutting width 1.0mmNo 4 : cutting width...
Polished forged steel, varnished handleN°1: Weight: 175 g / Length: 26.5 cm / Striking diameter: 19 mm / Head length: 90 mm N°2: Weight: 200 g /...
Wheel in specific high speed steel. Hand made and heat treated in our workshop. Spacing between teeth : N°4 : 6,75 mmN°5 : 5,40 mmN°6 : 4,50 mmN°7...
Spare round handle for leather sewing awl small
Handle to be used with round awls diameters 2 to 3mm Length : 14,5 cm
Total length : 95 mm Total width : 28 mm Weight : 100 g Handle : moabi, oak or boxwood. Brass ferule Total length: 85/95/105...