Home
Home There are 256 products.
Brass scabard for knife "L'Indispensable" - LEFT HAND
Brass scabbard for knife "L'Indispensable" Unchanged for more than 100 years, this versatile tool will be your reference for clean and accurate...
Button hole punch
Dimensions : Diameter 3 + 6mm slot Diameter 4 + 7mm slot Diameter 5 + 8mm slot Diameter 6 + 9mm slot
- Out-of-Stock
New gen skiving blades (r)
Références 3.1011D : right hand, 150mm 3.1011G : left hand, 150mm 3.1012D : right hand, 170mm 3.1012G : left hand, 170mm
ALENE COURBE EMMANCHEE N°0 - 95mm
Round awl with handle N°0-95mmForged on a spring steel base.Hand-polished to facilitate penetration into the thickest leathers.Square...
Spare chuck handle for edge beveler
Handle to be used with round awls diameters 2 to 3mm Length : 14,5 cm
Glover's needle (L3910)
Suitable for thick fabric or thin leather. Vendues par sachet de 25 Sizes : No 5 - L=40 mm D=0,8 mmNo 4 - L=42 mm D=0,8 mmNo 3 - L=44 mm...
"Au dé" straight needle - 1 sharp end (L3916)
Packs of 25 Sizes: No 6 - L=38 mm D=0,7 mmNo 5 - L=40 mm D=0,8 mmNo 4 - L=42 mm D=0,8 mmNo 3 - L=44 mm D=0,9 mmNo 2 - L=46 mm D=0,9...
Round leather sewing awl with handle - 11 to 13cm
Round awl Boxwood handle Diameters : Models 4 et 5 cm : D = 2,0 mm Models 6 et 7 cm : D = 2,5 mm Models 8, 9 et 10 cm : D = 3,0 mm Models 11, 12...
Thin round leather sewing awl no handle 5 cm
Round awl Diameters : Models 4 & 5 cm THIN : D = 1,5 mm Models 4 & 5 cm : D = 2,0 mm Models 6 & 7 cm : D = 2,5 mm Models 8, 9 &...
Round leather sewing awl with handle - 8 to 10cm
Round awl Boxwood handle Diameters : Models 4 et 5 cm : D = 2,0 mm Models 6 et 7 cm : D = 2,5 mm Models 8, 9 et 10 cm : D = 3,0 mm Models 11, 12...
Round leather sewing awl - 4 to 13cm
Round awl Boxwood handle Diameters : Models 4 et 5 cm : D = 2,0 mm Models 6 et 7 cm : D = 2,5 mm Models 8, 9 et 10 cm : D = 3,0 mm Models 11, 12...
Roofer's hammer leather handle left-handed
Forged steel head. Partial quenching of hammer ends for maximum hardness.Nail remover forged/quenched directly out of the head body. Notched...
Round strap end punch - No3 to 18
N°3 : 8mm N°4 : 11mm N°5 : 13mm N°6 : 15mm N°7 : 17mm N°8 : 19mm N°9 : 21mm N°10 : 23mm N°11 : 26mm N°12 : 28mm N°13 : 31mm N°14 : 33mm N°15 :...
ADJUSTABLE EDGE CREASER
Edge creaser to mark parallele lines on leather borders. Adjustable from 0 to 9mm Length : 20cm Brass screw / Boxwood handle / Forged head
Wooden edge creaser 18cm
Wooden edge creaser This thin, easy-to-hold formoir is particularly suitable for small and medium-sized parts. Made from Pau Amarello, selected for...
Beechwood edge creaser new model 21cm
Beechwood edge creaser new model This wide formoir has been specially designed for optimum ergonomics. Made from PEFC beech wood, this 4-groove...
WEBBING STRETCHER "REVOLUTION" ®
The round head is designed to have a progressive tensionning of the webbing, easily controlled with only one hand. The leverage divides the...
L'ESSENTIEL" CLAW KIT
To protect and organize your tools ; we have developed 3 new kits of pricking irons folded in a fine leather case :• N°01 : Kit A containing 3...
Straight paring knife n°3
Leatherworker's trimming knife for thinning leather.High-strength Bubinga handle with brass ferrule.Extremely hard, tempered carbon steel blade can...
Strap end punch English point - No 4 to 17
Distance between edges : N°4 : 11 mm N°5 : 13 mm N°6 : 15 mm N°7 : 17 mm N°8 : 19 mm N°9 : 21 mm N°10 : 23 mm N°11 : 26 mm N°12 : 28 mm N°13 :...
Oblong leather punch - No3 to 18
N°3 : 7mm x 2mm N°4 : 9mm x 2.5mm N°5 : 11mm x 2.5mm N°6 : 13.5mm x 3mm N°7 : 16mm x 3mm N°8 : 18mm x 4mm N°9 : 21mm x 4mm N°10 :...
Pointed tailor's scissors chrome n°9 right-handed
Pointed tailor's scissors N°8 : 225 mm N°9 : 250 mm N°10 : 275 mm
Flat nose tailor's scissors n°8 / 9
Flat nose tailor's scissors chrome plated N°8 : 225 mm N°9 : 250 mm
Linen scissors No 6 / 6.5 / 7 / 8
Linen scissors No 6 : 170 mm No 6.5 : 185 mm No 7 : 200 mm No 8 : 225 mm
Pricking / marking wheel for sets 687, 689 and 692
Wheel in specific high speed steel. Hand made and heat treated in our workshop. Spacing between teeth : N°4 : 6,75 mmN°5 : 5,40 mmN°6 : 4,50 mmN°7...
PRICKING IRON (702 serie)
With more than 450 references, we are selling the widest range in the market. Right / left / round teeths are avalilable ranging from the very...
Harness hammer - No 1 to 5
Polished forged steel, varnished handleN°1: Weight: 175 g / Length: 26.5 cm / Striking diameter: 19 mm / Head length: 90 mm N°2: Weight: 200 g /...
Simple edge beveler 0.4 to 2mm
Total length : 18 cm No 0 : cutting width 0.4mmNo 1 : cutting width 0.6mmNo 2 : cutting width 0.8mmNo 3 : cutting width 1.0mmNo 4 : cutting width...
Oval leather punch No1 to 18
N°1 : 1.5mm x 1mm *** will be back end of 2021 N°2 : 2mm x 1.5mm *** will be back end of 2021 N°3 : 2.5mm x 1,5mm *** will be back end of 2021 N°4...
Spare flat handle for leather sewing awl - small
Total length : 95 mm Total width : 28 mm Weight : 100 g Handle : moabi, oak or boxwood. Brass ferule Total length: 85/95/105...
Roofer's hammer wooden handle right-handed
Forged steel head. Partial quenching of hammer ends for maximum hardness.Nail remover forged/quenched directly out of the head body. Notched...
SHARPENING KIT FOR EDGE BEVELER
Sharpening kit for 3.747 edge beveler * One steel rod D3.5mm * Two A6 (105x148) sheets of sand paper P500 water-resistant (fine grit, silicon...
- Out-of-Stock
leather press- steel roller 25/40/60mm - wood handle
A generous handle for this tool. Mounted on bearings and riveted axle for increased durability. Available widths: 25mm // 40mm // 60mm
- Out-of-Stock
MANCHE D'ALENE ROND GRAND MODELE - MERISIER
ROUND AWL HANDLE LARGE MODEL - CHERRY WOOD Total length: 85/95/105 mm Wooden handle / brass ferrule The size of the handle depends on your...
ROUND AWL MEDIUM HANDLE MODEL - CHERRY WOOD
ROUND AWL HANDLE HANDLE MODEL - CHERRY WOOD Total length: 85/95/105 mm Wooden handle / brass ferrule The size of the handle depends on your...
ROUND AWL HANDLE SMALL MODEL - CHERRY WOOD
ROUND AWL HANDLE SMALL MODEL - CHERRY WOOD Total length: 85/95/105 mm Wooden handle / brass ferrule The size of the handle depends on your...
Hole punch tip 6.0mm for Revolving round punch 7734
Hole punch tip 6.0mm for Revolving round punch 7734
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
SADDLER CURVED AWL
SADDLER CURVED AWLForged on a spring steel base.Hand-polished to facilitate penetration into the thickest leathers.Square cross-section.N°00 -...
Round head knife
Quenched steel, then thinned and cold-sharpened to maintain optimal mechanical properties. Hand-sharpened cutting edge in a very tapered...
Belt loop clipper
Belt loop clipper, made out of plain noble wood in our workshop, perfectly fitting on your sewing jaws. Curved jaws to perfectly hold your finest...
Curved matress needle (C5135)
Pack of 12 Sizes (L = between ends): No 2 - L=30 mm D=0,9 mmNo 2.5 - L=40 mm D=1.0 mmNo 3 - L=48 mm D=1.5 mmNo 4 - L=63 mm...
French edge belever 3 to 15 mm
Total length : 18 cm No 3 : cutting width 3 mmNo 4 : cutting width 4 mmNo 5 : cutting width 5 mmNo 6 : cutting width 6 mmNo 8 : cutting width 8...
Saddler's head knife
Quenched steel, then thinned and cold-sharpened to maintain optimal mechanical properties. Hand-sharpened cutting edge in a very tapered...
EDGE FOLDING RULER 5 ET 7 mm
With this special tool, redesigned with our professionnal users, we are setting a new standard of quality on the market. Spring steel for maximum...
Steel ruler 50 cm
Réglet métallique en acier inoxydable Largeur 25mm Graduation recto-verso en 1/2mm Longueurs disponibles : 20 / 30 / 50 / 100cm
Spare blade for knife "L'Indispensable"
Spare blade for knife "L'Indispensable" Manufactured in several sharpening shapes : Standard = double bevel Right or left = single bevel
Saddler Edge Beveller - 1.0 and 1.5mm
Beech wood PEFC handle. Brass ferule. High speed steel, heat treated in our forge workshop. Dimension 17cm. Opening of 1.0 or 1.5mm available.
Belt loop clipper 15/25/35mm
Belt loop clipper, made out of plain noble wood in our workshop, perfectly fitting on your sewing jaws. Curved jaws to perfectly hold your finest...
- Out-of-Stock
NOMENCLATURE 1900 - 835x630mm
Re-print of a 1900 nomenclature, originally engraved by Acker's printing office in Paris. A real work of art made by hand, and reproduced here in...
Revolving round punch
Beginners tool made in metal sheets, this double axis revolver punch plier is delivering an outstanding power at the cutting point. It allows...
SADDLER HAMMER
A traditional saddler's hammer, offering high striking power and excellent maneuverability in hard-to-reach areas.Carbon steel head and body,...
WOODEN MALETTIER FORMOIR 170mm
This modeler takes the original forms of the tools of the malettier. Lightweight, ergonomic, durable, does not compromise and will accompany the...
Packing needle (C5061)
Pack of 12 Sizes : No 3 - L=075 mmNo 4 - L=100 mmNo 5 - L=125 mmNo 6 - L=150 mmNo 7 - L=175 mmNo 8 - L=200 mm Made by our partner :
Roofer's hammer wooden handle left-handed
Forged steel head. Partial quenching of hammer ends for maximum hardness.Nail remover forged/quenched directly out of the head body. Notched...
SPARE BLADE FOR BRASS PLOUGH
Blade and handle for 10cm and 15cm mechanical knives.This knife is handmade in our workshop out of high quality steel, quenched to deliver you a...
Upholstery regulator full steel long flat end
Upholstery regulator full steel long flat end Discover our Palette Litier upholstery ripping chisel, made entirely of steel. This tool is designed...
Upholstery regulator full steel flat end
Upholstery regulator full steel flat end Hand-Forged Steel Throughout, Heat-Treated in Our Workshop: Unmatched Strength For over 200 years,...
Oblique paring knife - n°1 / 2 / 3
Leatherworker's trimming knife for thinning leather.High-strength Moabi handle with brass ferrule.Extremely hard, tempered carbon steel blade can...
High speed steel paring knife
Leatherworker's trimming knife for thinning leather.High-density wood handle with brass ferrule.Hardened high-speed steel blade, can be sharpened...
Brass scabbard for knife "L'Indispensable" - Right hand
Brass scabbard for knife "L'Indispensable" Unchanged for more than 100 years, this versatile tool will be your reference for clean and accurate...
Untwister swivel wooden body
Untwister swivel wooden body Traditional swivel with 2 rotating ends. 4mm hardened steel wire / Beech body Length : 125mm
ABS mallet with caps 50 mm
Weight: 880 g Length: 34 cm Striking diameter: 45 mm Head length: 115 mmVarnished wooden handle / plastic tips
BRASS PLOUGH CUTTER - 10CM
This superb traditionnal leather cutting tool will soon become the 'must have' of your tool set.It will allow you to precisely cut leather stripes...
BRASS PLOUGH - 15CM (6")
This superb traditionnal leather cutting tool will soon become the 'must have' of your tool set.It will allow you to precisely cut leather stripes...
- Out-of-Stock
Multipurpose billhook knife
Total length : 15,5 cm High Carbon steel plade, rivetted Brass ferule on a varnished wood handle
Upholstery regulator full steel round tip
Hand-forged steel throughout, then heat-treated in our workshop: unmatched strength. The most appreciated ripping chisel model among our clients....
Nail puller - hard mapple handle
Forged and quenched steel for an unequaled strenght. Hard mapple handle and brass ferrule. Length : 23 cm Weight : 140 g
Roofer's hammer leather handle right-handed
Forged steel head. Partial quenching of hammer ends for maximum hardness.Nail remover forged/quenched directly out of the head body. Notched...
Roofer's anvil 40 cm right-handed
High resistance heat treated steel. Sharp cutting edge for optimum results with all kind of substrat and improved life time. Edge lenght : 40cm...
Roofer's anvil 40 cm left-handed
High resistance heat treated steel. Sharp cutting edge for optimum results with all kind of substrat and improved life time. Edge lenght : 40cm...
Roofer's anvil 50 cm right-handed
High resistance heat treated steel.Sharp cutting edge for optimum results with all kind of substrat and improved life time.Edge lenght :...
Roofer's anvil 50 cm left-handed
High resistance heat treated steel.Sharp cutting edge for optimum results with all kind of substrat and improved life time.Edge lenght :...
Roofer's nail puller flexible blade
Roofer's nail puller to easily remove nails located under any type of cover. Flexible blade in spring steel. Forged hammering head. Lenght : 62cm
MAGNETIC TACK HAMMER - PLASTIC TIP
Magnetic head - Ash wood handle ABS knocking tip diameter 10mm Weight : 210g Lenght : 28cm
Upholsterer's pins - large head (100 pieces)
Total length : 60 mm Diameter : 1.4mm Round plastic head 7mm Colors available : white, red, yellow, green Boxes of 100 units
Upholsterer's pins - diamond head (100 pieces)
Total length : 60 mm Diameter : 1.4mm Round plastic head 5mm Colors available : blue, red, yellow, green Boxes of 100 units
Straight ripping chisel boxwood handle
Forged steel, boxwood handle, brass ferule Length : 24 cm Weight : 140 g
Angled ripping chisel wood handle
Forged steel, boxwood or acacia handle, brass ferrule. Length : 23 cm Weight : 140 g
Webbing stretcher
Webbing stretcher with V-groove for improved stability. Five steel nails to penetrate al type of webbing. Length : 18 cm Width : 9 cm
Creasing iron n°1 with handle
Creasing Iron for Leatherwork The creasing iron has a total length of 31 cm. It features a width of 2 mm and is thicker than the number 2 creasing...
Creasing iron n°2 with handle
Creasing Iron for Leatherwork The creasing iron has a total length of 31 cm. It features a width of 1 mm, while the number 1 model has a width of 2...
- Out-of-Stock
Creasing iron n°3 with handle
The creasing iron has a total length of 31 cm. It features a width of 0.5 mm and a space of 1 mm. The creasing iron is an essential tool for...
Creasing iron with guide with handle
It features a width of 1 mm, a space of 1 mm, and the guide protrudes by 2 mm. The guide allows for precise and consistent marking along the edges...
- Out-of-Stock
- Out-of-Stock
- Out-of-Stock
FOURCHETTE A EBAVURER 34°RENFORCEE MANCHE ERTACETAL
FOURCHETTE A EBAVURER 34°RENFORCEE MANCHE ERTACETAL
Straight needle, 2 round points (C5076)
Pack of 12 Sizes : No 08 - L=200 mm D=2.0 mmNo 10 - L=250 mm D=2.3 mmNo 12 - L=300 mm D=2.3 mmNo 14 - L=350 mm D=2.3 mmNo 16 - L=400...
Straight matress needle - (C5128)
Pack of 12 Sizes : No4 - L=100mm - D=1.9mm No5 - L=125mm - D=1.9mm No6.13 - L=150mm - D=2.3mm No6.14 - L=150mm - D=2.0mm No8.14 - L=200mm -...
Round tip needle (L3912)
Pack of 25 Sizes : No 5 - L=48mm D=0.8 mm (S+U Germany) No 4 - L=48 mm D=0,85 mmNo 1/2/3 - L=54 mm D=1.02 mmNo 1/0 - L=58mm D=1.1mmNo...
Sail needle - triangular (C5062)
Pack of 25 Sizes : No 08 - L=116mmNo 10 - L=095mm No 12 - L=084mm No 13 - L=077mm No 14 - L=070mmNo 15 - L=063mmNo 16 - L=061mmNo 17 - L=058mmNo 18...
- Out-of-Stock
Simple pricking / marking wheel set, with one wheel n°…
Total length : 25 cm Varnished wood handle, copper, forged steel Mounted with one wheel no7 : 3.85mm between teeth Don't forget to order other...
Edge clamp plier
Tensionning pliers with dual axes for a better clamping force control, preventing leather or fabrics slippering. Light and ergonomic, this pair of...
Pricking / marking wheel set, with reservoir
Total length : 25 cmVarnished wood handle, copper, forged steel Delivered with 4 wheels 7,8,10,12 (3.85mm / 3.38mm / 2.70mm / 2.25mm)Tool can be...
Pricking / marking wheel set, with reservoir and fence
Adjustable side leadTotal length : 25 cmVarnished wood handle, copper, forged steel Delivered with 4 wheels 7,8,10,12 (3.85mm / 3.38mm / 2.70mm /...
Edge creaser boxwood handle
Edge creaser to mark all sketched on leather (preparation for sewing of cuttting). Ergonomic bent head to facilitate constant pressure. Losangique...
- Out-of-Stock
Leather planer hammer square and round heads
Weight: 470 g Length: 29 cm Round head diameter: 30 mmSquare head width: 30 mmForged steel, varnished handle
Carving chisel mobile blade
Trimming knife for smoothing cut edges.Adjustable movable blade to compensate for wear as you sharpen.Boxwood handle / Brass ferrule / High-speed...
Punch pincers n°7730 forged 6 tips
included: Diameter of Punch pincers : 2mm / 2.5mm / 3mm / 3.5mm / 4mm / 5mm
Stitching clam varnished wood 1050 x 72 mm
Stitching clam varnished wood 1050 x 72 mm Handcrafted in France from glued laminated Meranti for excellent strength and dimensional stability....
Stitching clam varnished wood 1300 x 72 mm
Handcrafted in France from glued laminated Meranti for excellent strength and dimensional stability. Total length: 130 cm Large working...
SHARPENING RIFLE 20 CM WOOD HANDLE
SHARPENING RIFLE 20 CM WOOD HANDLE Total length: 31.5 cm Rifle length: 20 cm Wooden handle Brand: Au Nain
- Out-of-Stock
Striking ERTALON plate 200 x 150 x 20
High-density Ertalon tapping plate for punches and tapping claws. A highly impact-resistant, anti-kickback polymer, it's the perfect compromise...
- Out-of-Stock
Straight fid wooden handle
Straight fid wooden handle Total length: 24 cm Forged steel, copper alloy ferrule, varnished boxwood handle
- Out-of-Stock
